
Importance of FRP Water Tanks for Supply
FRP Water Tanks’ growing demand for water has resulted in many people looking for alternative methods of water supply to meet their needs. A good option would be installing a functioning reverse osmosis (RO) system, which would purify drinking water by separating the impurities from it. The most common type of RO system is the fiberglass resin process (FRP) tank, and many homeowners are opting to install them instead of building a traditional structure. This article will explore the important benefits of using FRP tanks for water supply and how they can be installed in your own home.
What is an FRP Tank?
Many homeowners are unaware that they can also use fiberglass tanks to store water. These tanks are fully encased in resin, which makes them waterproof and resistant to corrosion. They are also light in weight so they can be easily installed. The resin used in the process of making FRP Water tanks is carbonized coconut husk fiber and is FDA-approved. The carbonized husk fiber is highly hydrophobic, which makes it resistant to permeable to nearly all chemicals and pollutants.
Because of this, FRP Water tanks can be used for water supply or for wastewater. Water is pumped into the tank via an aluminum or copper pipeline, and the water is filtered down to 2 microns. The filtering process removes all impurities, including viruses, bacteria, and other impurities. The water is then stored in the tank and is available for use whenever you want. The tanks can be outfitted with either a needle valve or a gate valve.
Advantages of Using FRP Tanks for Water Supply
FRP tanks are durable, reliable, and tough. They can withstand high temperatures and last for decades without any issues. The material used in the manufacturing of these tanks is anti-corrosive and anti-fungal, so they can be used without any issues. – Properly Filtered – The water stored in an FRP tank is properly filtered and disinfected.
The water stored in an FRP tank is properly filtered and disinfected. – Lightweight – FRP tanks are lightweight and can be installed almost anywhere. Unlike a conventional steel or concrete water tank, you can use an FRP tank in any location, including your garage, backyard, or inside utility room.
The initial cost of setting up an FRP water tank system is low compared to a conventional water tank. This can be a good option for homeowners who are renovating their homes and want water but don’t have enough money for a full-blown water tank installation. – Long-Lasting – Unlike a conventional steel or concrete tank, an FRP tank does not require regular maintenance. It filters the water properly and keeps it safe for use. Since it is lightweight, it can be easily moved to a different location if you want to expand your water storage capacity.
Disadvantages of Using FRP Tanks for Water Supply
Although the initial cost of setting up FRP Water tanks is low, you will have to invest in another system for filtering and storing the water. This will make the system expensive. – Installation – You will have to install an FRP water tank for every 5,000 gallons of water you want to store. An installation of an FRP tank requires extensive experience and expertise, which most homeowners don’t have. – Storage – Like a conventional steel or concrete tank, an FRP tank has limited storage capacity.
This means that you have to refill the tank more often and, in some cases, more than once a week. – Heavy – An FRP tank weighs around 50-150 pounds depending on the type and size of the tank you have. The weight may pose a problem if you have a small backyard and want to install an FRP tank. – Exposed – An FRP tank is visible and can be damaged if it falls from a height or is hit by a powerful storm. This means that the tank needs to be placed indoors, which again is an expensive investment.
Installation of FRP Tanks for Water Supply
Installing FRP water tanks for water supply is not difficult. You will have to choose a suitable location for the tank and make sure that the place is well-ventilated and has minimal sunlight. The tank should be placed at an elevation so that water is always flowing through it.
The next step is to choose an appropriate location for the tank. You can use a utility room, storage room, or garage. Next, you will have to dig a small hole in the tank or install a prefabricated structure for it.
You can use a prefabricated frame or an in-ground liner. In any case, you should check the ground for any potential hazards. When you have finalized the location and the installation, you can start digging the hole.
Conclusion
An efficient water supply system is a must for any home. The better the quality of your water, the better your health and the productivity of your loved ones will be. However, setting up such a system can be expensive and time-consuming, so you may want to consider using an alternative option. An effective and efficient method of water supply is an in-ground water tank. These tanks offer several advantages, including a reliable and steady supply of water, improved safety, and increased capacity.
One such option is the use of an in-ground water tank for water supply. The advantages of using an in-ground water tank for water supply are discussed in this article, and you will learn about the importance of an in-ground tank system for you and your family if you decide to use one.