Hot Dipped Galvanized Steel Sectional Water Tanks

BS1654 Tanks provide best earthquake resistant and durability in Steel Sectional Water Storage Tanks.

PIPECO manufactures BS 1564:1975 type 2. This tanks could be used for main water storage unit for military camp, villages,cities etc.

BS 1564 tanks are applicable for any outdoor application and can stand steel.

PIPECO HDG TANKS

dESIGN

131 Level Residence minimally impacts the environment by utilizing recycled building materials and a large 20Kw solar system for power generation. Incorporating passive design techniques, each dwelling efficiently regulates ambient temperature, significantly reducing heating and cooling costs.

  • Materials - The steel used in the manufacture of the tank plates, stays and cleats conform to the requirements of BS 4360: 1972 grade 43A or ISO equivalent
  • Flanges of Plates : The tank plates are pressed with a combined double flange at an angle of 45 degree and 90 degree to the face of the plate on four sides
  • Stays & Cleats: The stays and cleats are made of steel angle bar and steel plate
bs004 (1)
bs006
  • Bolts, Nuts & Washers : Hot Dipped Galvanized steel bolts, nuts and washers for internal and external
  • Jointing Materials : Non-toxic PVC foam to be used for all jointing between tank panel flange
  • Tank Cover : Panel type or pitched type steel cover supported by trusses 600 x 600 square manhole and 100mm air-vent supplied as standard for each compartment
  • Water Level Indicator : Mechanical Ball Float Type
  • Ladder : Aluminium or HDG Steel ladder for internal and external access
  • Finish : Hot Dip Galvanized conform to BS 729 or ISO equivalent Black Bituminous Coated.
ing1225sackalinlik (1)

MATERIAL ALTERNATIVES

Thickness of pressed steel panels are from 4 mm to 6 mm.

Hot dip galvanized carbon steel, (Galvanize coating is done , according to EN ISO 1461 standard)

AISI 304 (EN 1.4301)

AISI 316 (EN 1.4401)

Design Options

BS 1564 Pressed Steel Sectional Water Storage Tanks located on top of a tower.

Tanks’ roofs could be designed inclined and located outdoor.

 

Tanks can be designed as either internally or externally flanged base. Even internally flanged based tanks could be installed on a flat base.

tr1225kaidedetay

BS1564 Tanks could be divided into 2 or more divisions. (Please contact PIPECO R&D department.)

All of fittings are welded/adapted on the panels in PIPECO'S factory. Fittings locations and sizes are defined by customers.

Options could be negotiated during the price offer period.

LOCATION PLAN

CAPACITY CHART

GET A QUOTE